1. If there are no retaining screws , simply lift the fixture off the bracket. 2. If no retaining screw is visible, check the top of the faucet handle. 3. Look for retaining screws holding the fixture to the bracket. 4. The adjustable front sight could be lost if the retaining screw wasn't tightly secured. 5. It commonly has a fixed front sight and a rear sight with no retaining screw . 6. Removal then required first removing the socket cover, to allow this retaining screw to be removed. 7. The top may be secured with retaining screws at the rear corners or near the lint trap. 8. The main panel is usually held in place with retaining screws and two springs at the bottom corners. 9. Position the anchor plate over the hole in the toggle flange and drive the retaining screw in place. 10. If you find retaining screws , remove them and lift up on the fixture to slide it off the bracket.
Mobile